SparkFun Thing Plus - ESP32-S2 WROOM

SKU: B098TZ64LK

ORIGEN: Amazon (ver producto)

ENTREGA: De 7 a 15 días laborables, comprendidos de lunes a viernes.


  • ESP32-S2 Module: Xtensa Single-Core 32-bit LX7 Microprocessor (up to 240MHz); RISC-V ULP Coprocessor: 128KB ROM and 320KB SRAM, 4MB of Embedded SPI Flash Storage; Cryptographic Hardware Accelerators: AES, ECB/CBC/OFB/CFB/CTR, GCM, SHA, RSA, and ECC (Digital Signature)
  • Physical Security Features: Transparent external flash and RAM encryption (AES-XTS), Secure Boot feature ensures only signed firmware (with RSA-PSS signature) is booted, HMAC and Digital Signature modules use software inaccessible keys to generate SHA-MAC and MAC signatures
  • Integrated 802.11 b/g/n WiFi 2.4GHz Transceiver (up to 150Mbps); Integrated Temperature Sensor (-20°C to 110°C); Operating Voltage: 3.0 to 3.6V: WiFi: 310mA (peak), Light-Sleep: 550µA, Deep-Sleep: 20-235µA
  • 21 Available GPIO: 16x 12-bit ADC Channels, 2x 8-bit DAC, 14x Capacitive Touch Sensing, 4x SPI (only one is configured by default in the Arduino IDE), 1x I2S, 2x I2C (only one is configured by default in the Arduino IDE), 2x UART (only two are configured by default in the Arduino IDE, one UART is used for bootloading/debug), 8x PWM Channels
  • Note: No Bluetooth included. JST LiPo Battery Connector; Qwiic Connector; USB-C Connector; JTAG PTH Pins; Feather Footprint

-------------------------------------------------------------------------
Compra online este producto en YaEstá.com y recíbelo en la puerta de tu casa u oficina.

No disponible por el momento.
No sabemos si este producto volverá a estar disponible, ni cuándo.


SparkFun Thing Plus - ESP32-S2 WROOM

SKU: B098TZ64LK

ORIGEN: Amazon (ver producto)

ENTREGA: De 7 a 15 días laborables, comprendidos de lunes a viernes.


  • ESP32-S2 Module: Xtensa Single-Core 32-bit LX7 Microprocessor (up to 240MHz); RISC-V ULP Coprocessor: 128KB ROM and 320KB SRAM, 4MB of Embedded SPI Flash Storage; Cryptographic Hardware Accelerators: AES, ECB/CBC/OFB/CFB/CTR, GCM, SHA, RSA, and ECC (Digital Signature)
  • Physical Security Features: Transparent external flash and RAM encryption (AES-XTS), Secure Boot feature ensures only signed firmware (with RSA-PSS signature) is booted, HMAC and Digital Signature modules use software inaccessible keys to generate SHA-MAC and MAC signatures
  • Integrated 802.11 b/g/n WiFi 2.4GHz Transceiver (up to 150Mbps); Integrated Temperature Sensor (-20°C to 110°C); Operating Voltage: 3.0 to 3.6V: WiFi: 310mA (peak), Light-Sleep: 550µA, Deep-Sleep: 20-235µA
  • 21 Available GPIO: 16x 12-bit ADC Channels, 2x 8-bit DAC, 14x Capacitive Touch Sensing, 4x SPI (only one is configured by default in the Arduino IDE), 1x I2S, 2x I2C (only one is configured by default in the Arduino IDE), 2x UART (only two are configured by default in the Arduino IDE, one UART is used for bootloading/debug), 8x PWM Channels
  • Note: No Bluetooth included. JST LiPo Battery Connector; Qwiic Connector; USB-C Connector; JTAG PTH Pins; Feather Footprint

-------------------------------------------------------------------------
Compra online este producto en YaEstá.com y recíbelo en la puerta de tu casa u oficina.

Marca: SparkFun

Fabricante: SparkFun Electronics

Categoría: Computadoras de Placa Reducida

Grupo: Personal Computer

Pieza / parte: WRL-17743

Modelo: WRL-17743

Color: Red

Alto: 0.31 Pulgadas

Ancho: 0.94 Pulgadas

Largo: 2.64 Pulgadas

-------------------------------------------------------------------------
Compra online este producto en YaEstá.com y recíbelo en la puerta de tu casa u oficina.

No existen comentarios para este producto

Si deseas hacer una evaluación, inicia sesión